quality Airless Paint Spray Machine & Airless Putty Spray Machine manufacturer

See automatic plastering machine work effect in building construction? Automatic plastering machine is widely used in large residential, commercial, industrial buildings, thick steel structure fire protection engineering, tunnel fire protection engineering, heavy anti-corrosion engineering, gypsum mortar spraying engineering, external wall waterproof insulation engineering. Compare to normal plaster machine, it with intelligent module design, save labor cost and time. There are many advantages as below: 1. Intelligent module design, set mixer, self-priming pump, micro air compressor and screw pump all-in-one machine 2. Automatic feeding, metering water supply, remote control, set mixing, pumping spraying function into one, pressure sensing technology control, for automatic uninterrupted, continuous work of mortar spraying construction machinery. 3. Spray gun blowhole ball valve, control machine start and stop easy to control material loss. 4. Automatic water feeding system, one key start and stop, adjust the water level, self-priming water, one key start and stop, saving time and effort. 5. Automatic feeding system independent premixed dry mortar storage area, the storage area premixed and pumping area separated, you can add dry mixed mortar to the equipment at any time. The equipment sends the dry powder mortar to the mixing bin through the feeding wheel, so that the mixed wet material and the spraying of the wet material are very uniform, and the quality of the project is guaranteed. 6. Quiet air compressor imported from Germany, large gas storage tank, uniform out, good spraying effect, to ensure the quality of the project. 7. Wear-resistant conveying pump body imported from Germany, reliable quality and long life, reducing construction costs and speeding up construction progress. Can quickly split the pump body, easy to maintain, clean and transport.

    High pressure airless spraying, normally refers to the use of high pressure plunger pump, directly pressurize the paint, form a high pressure paint, spray the muzzle to form atomized air acting on the surface of the object. Compared with gas spraying, the paint surface is uniform and has no granular feeling. Due to its isolation from the air, the paint is dry and clean. Airless spraying can be used for the construction of high-viscosity paint, and the edge is clear, and even can be used for some spraying projects with boundary requirements. Widely used in ships, vehicles, steel structural parts, Bridges, petroleum, petrochemical, construction and machinery industries.     Advantages of airless spraying: 1. High construction painting efficiency Airless spraying efficiency is 3 times higher than air spraying, more than 10 times higher than brush painting, especially suitable for spraying large workpieces and large-area workpieces. Airless spraying can obtain thicker coating film, reduce spraying times and improve painting efficiency. 2. Good film quality Airless spray paint mist does not contain compressed air, no rebound phenomenon, reduce the spray caused by the paint mist flying, to avoid the compressed air of water, oil, dust into the film, improve the quality of the film. 3. Reduce pollution to the environment airless spray does not use air atomization, paint spray less splash, paint does not need to add diluent or only add a very small amount of diluent, greatly reducing VOCs emissions, conducive to environmental protection. 4. Wide adaptability to the viscosity of the paint because the transportation and spraying of the paint are carried out under high pressure, high viscosity paint can be sprayed. Choose an airless spray machine with relatively large pressure, and even spray liquid coatings or coatings containing fibers. However, it should be noted that airless spraying is not suitable for small workpieces, and there are requirements for equipment and construction technology, and the operator needs protection.